Kripsol Domestic Pumps and Filters

Self-priming centrifugal pumps

• Thermoplastic injection moulded casing reinforced with glass fibre. Hinged lid closing screws with stainless steel studs and O ring. Noryl impellor inserted with 303 stainless steel. IP 54 rated motor with protection, class F.
• Connections either Ø50 or Ø63mm socket unions (with imperial adaptors supplied).
• Suitable for use with salt water.
• Motor sizes 0.33 - 3 HP single and three phase.

BALEAR series laminated filters – side and top mount

• Kripsol BALEAR series laminated filters made in polyester finished in an attractive sparkling gloss red.
• “BL” models: Screw threaded Ø220 mm injection moulded transparent polycarbonate lid with manual air relief valve. Includes pressure gauge, 1½” multiport valve with 400 to 640 diameter connections and 2” multiport valve with 760 and 900mm connections.
• “BT” models: Fitted with six way 1½” TOP mount valve and pressure gauge.
• These models are manufactured in diameters of 400, 450, 520 and 640 mm.

Visit the Kripsol website at: www.kripsol.com.es

kripsol downloads

HCP3800 Series​
 

• High capacity pre-filter with Thermoplastic hydraulic body. 
• Impeller and flange in noryl charged with fibreglass. 
  
• MOTOR: IP 55 protection, insulation class F. 50 hz. 2.850 R.P.M. IE3 rated. 
  
• MAXIMUM WATER: Temperature 50ºC, maximum pressure 2,5 BAR.  60 Hz available 
  
• This pump is suitable to be used with sea water (316 s/s mechanical seal).  90mm/3” connections 
  
• Motor sizes 2.5 – 4.5HP single and three phase

---